Q-Logic 59047-10 D Switch User Manual


 
5–Fabric Element MIB Objects
fcFxPortPhysLastChange (1.3.6.1.2.1.75.1.2.2.1.3)
5-16 59047-10 D
fcFxPortPhysLastChange (1.3.6.1.2.1.75.1.2.2.1.3)
The value of sysUpTime at the time the FxPort entered its current operational
status. A value of zero indicates that the FxPort's operational status has not
changed since the agent last restarted.
Syntax TimeStamp
Access read-only
Status current
Return Value Unsupported. Always returns error status "NoSuchName".
fcFxPortPhysRttov (1.3.6.1.2.1.75.1.2.2.1.4)
The Receiver_Transmitter_Timeout value of the FxPort. This is used by the
receiver logic to detect a loss of synchronization.
Syntax Milliseconds
Access read-write
Status current
Return Value The default RT_TOV parameter is: 100 (0x64). This is a global setting for the
switch. If writing value to a port, all ports will reflect this new value.
Fx Port Fabric Login Table
The objects described in this section are in table format indexed by switch index
and port index. An example of how to access one of these objects is: "snmpget
localhost public fcFxPortFcphVersionAgreed.1.1". This table contains one entry
for each FxPort in the fabric element and the service parameters that have been
established from the most recent Fabric Login (implicit or explicit).
This table contains one entry for each FxPort in the fabric element, and the
service parameters that have been established from the most recent Fabric Login,
implicit or explicit.