Filter
Top Products
5–Fabric Element MIB Objects
Module Table
5-4 59047-10 D
Module Table
The objects described in this section are in table format indexed by switch. An
example of how to access one of these objects is: "snmpget localhost public
fcFeModuleDescr.1". This table contains one entry for each module.
fcFeModuleDescr (1.3.6.1.2.1.75.1.1.4.1.2)
A textual description of the module. This value should include the full name and
version identification of the module.
Syntax SnmpAdminString
Access read-only
Status current
Return Value A configuration description of the module table entry. The defaults are:
QLogic 5200 = SANbox 5200 FC Switch, QLogic 5202 = SANbox 5202 FC
Switch, QLogic 5600 = SANbox 5600 FC Switch, QLogic 5602 = SANbox
5602 FC Switch
fcFeModuleObjectID (1.3.6.1.2.1.75.1.1.4.1.3)
The vendor's authoritative identification of the module. This value may be
allocated within the SMI enterprises subtree (1.3.6.1.4.1), and provides a means
for determining what kind of module is being managed.
For example, this object could take the value 1.3.6.1.4.1.99649.3.9 if vendor
“Neufe Inc.” was assigned the subtree 1.3.6.1.4.1.99649, and had assigned the
identifier 1.3.6.1.4.1.99649.3.9 to its FeFiFo-16 PlugInCard.
Syntax OBJECT IDENTIFIER
Access read-only
Status current
Return Value The module identification numbers are: QLogic 5200 =
1.3.6.1.4.1.1663.1.1.1.1.17, QLogic 5202 = 1.3.6.1.4.1.1663.1.1.1.1.30,
QLogic 5600 = 1.3.6.1.4.1.1663.1.1.1.1.23, QLogic 5602 =
1.3.6.1.4.1.1663.1.1.1.1.24