Q-Logic 59047-10 D Switch User Manual


 
3–MIB-II Objects
ipRouteType (1.3.6.1.2.1.4.21.1.8)
59047-10 D 3-25
ipRouteType (1.3.6.1.2.1.4.21.1.8)
The type of route. The values direct(3) and indirect(4) refer to the notion of direct
and indirect routing in the IP architecture. Setting this object to the value invalid(2)
has the effect of invalidating the corresponding entry in the ipRouteTable object.
That is, it effectively disassociates the destination identified with the entry from the
route identified with the entry. It is an implementation-specific matter as to whether
the agent removes an invalidated entry from the table. Accordingly, management
stations must be prepared to receive tabular information from agents that
corresponds to entries not currently in use. Proper interpretation of such entries
requires examination of the relevant ipRouteType object.
Syntax INTEGER
Access read-write
Status mandatory
Return Value Writes not supported.
ipRouteProto (1.3.6.1.2.1.4.21.1.9)
The routing mechanism through which this route was learned. Inclusion of values
for gateway routing protocols is not intended to imply that hosts should support
those protocols.
Syntax INTEGER
Access read-only
Status mandatory
ipRouteAge (1.3.6.1.2.1.4.21.1.10)
The number of seconds since this route was last updated or otherwise determined
to be correct. No semantics of `too old' can be implied except through knowledge
of the routing protocol by which the route was learned.
Syntax INTEGER
Access read-write
Status mandatory
Return Value Writes not supported.