Filter
Top Products
22
Beyond the Basics
• If you entered a frequency in
Step 4, which already exists on
another channel, the scanner beeps
an error tone and displays that
channel. Press •/CLR /DELAY to
clear the display, or press E/PGM
to store the frequency in both
channels.
• The scanner automatically rounds
the entered number to the nearest
valid frequency. For example, if you
enter 151.473 (MHz), your scanner
accepts it as 151.475.
• After a transmission, the scanner
automatically pauses for 2 seconds
on this channel before proceeding
to the next active transmission.
Press •/CLR /DELAY to turn the
delay function off or on. See
“delay”). The scanner stores this
setting in the channel.
6. To program the next channel in
sequence, press S or T and repeat
Steps 4 and 5.
copying/moving a frequency
If you want to copy/move a frequency to a
channel, follow the steps below:
1. Manually select the channel which
contains the frequency you want to
copy or move.