Filter
Top Products
75
Beyond the Basics
3. Repeatedly press S or T to select
FLEEt, then press E/PGM. A
preprogrammed fl eet map appears.
4. Repeatedly press S or T until USr
appears. Then press E/PGM.
5. Repeatedly press S or T to select
the size code for the fi rst block, then
press E/PGM. The next available block
appears.
6. Repeat Step 5 until you have selected a
size code for each desired block.
7. Press SRCH. The scanner exits the
trunking programming mode, tunes the
data channel, then searches using the
map you programmed.
Note: If you select size code S-12, S-
13, or S-14, these restrictions apply:
• S-12 can only be assigned to Blocks
0, 2, 4, or 6
• S-13 can only be assigned to Blocks
0 and 4
• S-14 can only be assigned to Block
0
Since these size codes require multiple
blocks, you will be prompted for the next
available block when you program a fl eet
map. For example, if you assign Block 0
as S-12, the scanner prompts you for b2,
the next block available, instead of b1. If
Notes