Filter
Top Products
39
Beyond the Basics
If you press a key (except ) within 5
seconds, the display remains lighted for
more than 15 seconds.
To turn auto backlight display on or off:
1. Press MENU.
2. Repeatedly press S or T to select
AutoLit, then press E/PGM.
3. Repeatedly press S or T to select ON
or OFF, then press E/PGM.
4. Press MENU to exit the menu mode.
search speeds
Note: Hypersearch applies only to the
5 kHz step bands (29–54 MHz, 137–
174 MHz, and 216–224.9950 MHz).
The scanner has two search speeds.
Normal Search (90 steps/second )
Hypersearch (270 steps/second)
turning the keytone off/on
Each time you press any of the scanner’s
keys, the scanner sounds a tone. To turn
the scanner’s key tone off or on:
1. Press MENU.
2. Repeatedly press S or T to display
bEEP, then press E/PGM.
3. Repeatedly press S or T to select OFF
or ON, then press E/PGM.
Notes