Filter
Top Products
84
Beyond the Basics
Follow these steps to restore the 150
preprogrammed frequencies stored in the
private bank.
1. Make sure your scanner is turned off.
2. Press 3 and E/PGM simultaneously
while turning on the scanner. After
several seconds, the scanner restores
the frequencies.
FCC notice
Your scanner might cause radio or TV
interference even when it is operating
properly. To determine whether your
scanner is causing the interference, turn off
your scanner. If the interference goes away,
your scanner is causing it. Try the following
methods to eliminate the interference:
• move your scanner away from the
receiver
• connect your scanner to an outlet that
is on a different electrical circuit from the
receiver
• contact your local RadioShack store for
help
Note: Mobile use of this scanner is
unlawful or requires a permit in some
areas. Check the laws in your area.
Notes