Radio Shack PRO-528 Scanner User Manual


 
82
Beyond the Basics
“programming trunked frequencies.”
The system you are trying to track is a Type
I system, and the scanner is set to scan
Type II systems. Set the scanner to receive
Type I trunked frequencies. See “scanning
type I and hybrid trunked systems”.
Scanner is set to receive Type I trunked
frequencies, but does not scan them. The
eet map you have selected or entered
might be incorrect.
Check the eet map and correct it if
necessary (see “scanning type I and hybrid
trunked systems” and “programming a
eet map”).
Why isn’t my scanner acquiring
a data channel?
SQUELCH is not correctly adjusted for
trunk scanning. Adjust squelch for trunk
scanning. See “setting squelch for the
trunking mode”.
Why is the frequency used for
the data channel missing?
Press SRCH to search for the data channel
(see “programming trunked frequencies”).
Why am I missing replies to
conversations?
The system you are trying to track is a Type
I system, and the scanner is set to scan