Filter
Top Products
66
Beyond the Basics
EDACS (Ed) talk groups
To enter a full EDACS ID:
1. Enter the Agency number.
2. Press •/CLR/DELAY to enter the dash.
3. Enter the fl eet number and subfl eet
number.
4. Press E/PGM.
entering EDACS partial talk
groups
You can enter partial group numbers in an
EDACS talk group. By entering only the
desired portion of a group, you can select
either 128, 8, or 1 talk group. For example,
you might program every talk group in a
police department by pressing just four
keys.
Note: You cannot use partial talk
groups in decimal mode. (See
“selecting the EDACS talk group ID
format”).
You can program a specifi c talk group
such as 01-011 into the scan list memory.
In AFS mode, you can program the talk
groups for an entire agency by pressing
corresponding keys.
Notes