Filter
Top Products
51
Beyond the Basics
5. When you select the option, press •/
CLR /DELAY to exit the option mode.
6. Press MENU to exit the menu mode.
using Signal Stalker I
Note: Turn off the data skip feature if
it is on.
To turn on Signal Stalker I, turn SQUELCH
fully clockwise, then press
except
in WX search, program search range,
or program mode. appears. Every
2 seconds, the scanner searches for
frequencies in the range you specifi ed in
“Setting the Signal Stalker I Options.”
When the scanner fi nds a frequency, it
sounds the alert you specifi ed in “Setting
the Signal Stalker I Options”, and Found
fl ashes. Press any key to confi rm the
displayed frequency. Press HOLD/RESUME
to resume scanning.
To turn on Signal Stalker I and turn off
normal scanning, turn S-S.OnlY of Signal
Stalker I options to on.
fl ashes. See
“setting the Signal Stalker I options.”
To turn off Signal Stalker I and turn on
normal scanning, press
and
disappears.
trunking operation
The scanner tracks transmissions that use
the Motorola Type I, Type II, hybrid, and
EDACS and LTR analog trunking systems.
Notes