Filter
Top Products
48
Beyond the Basics
or if the transmitter is a broadcast
television station.
setting the Signal Stalker I options
1. Press MENU.
2. Repeatedly press S or T to select
SIG-St., then press E/PGM. One of
the following Signal Stalker I options
appears:
• S-S.bnd: Lets you select the Signal
Stalker I band.
• S-S.ALt: Lets you select the Signal
Stalker I alert settings.
• S-S.Lit: Lets you select the Signal
Stalker I back light settings.
• S-S.PS: Lets you select the pager
screen settings.
• S-S.OnlY: Lets you select the Signal
Stalker I mode settings.
• S-S.Int: Lets you select the Signal
Stalker I voice interrupt settings.
While the Signal Stalker I is on and the
scanner is receiving an audio signal
(voice) in normal scanning, the scanner
checks the Signal Stalker I every 2
seconds and the audio signal breaks
at that moment. If you do not want the