Filter
Top Products
37
Beyond the Basics
appear. Then send the data from the
PC. Data frame numbers being received
appear.
6. When the scanner has successfully
received all data, End appears. If
the scanner received an error while
receiving data, End, d-Err, and its frame
number appear. If the scanner received
a communication error while receiving
data, C-Err indicates the packet
number where the error occurred. If
the scanner received a checksum error
while receiving data, S-Err indicates
the packet number where the error
occurred. If the scanner received a
length fi eld error while receiving data,
L-Err indicates the packet number
where the error occurred.
cloning your scanner
You can clone all the frequencies, trunking
talk groups, and fl eet maps programmed in
your PRO-528 to another PRO-528 or PRO-
433 using an optional interface cable and
software.
1. Make sure the scanners are turned
off and then plug the cable into each
scanner’s PC/IF jack.
2. While you press and hold E/PGM on
both scanners, turn on both scanners.