Filter
Top Products
62
Beyond the Basics
signals. You can lock out up to 100 IDs at
one time.
Note: If you lock out an ID while
searching, it is also locked out of the
scan list(s). See “using talk group ID
lists.”
To lock out an ID, press L/O when the ID
appears. The ID is locked out, and the next
active ID appears.
unlocking a single talk group ID
You can check all IDs already locked out.
1. Select the trunking programming mode
and the bank you want to review.
2. When the selected trunked system is
displayed, press E/PGM.
3. Use S or T to choose Id Lout, and
press E/PGM.
4. Press L/O, the ID is unlocked and the
next locked ID displays.
5. If you unlocked all locked IDs, the
scanner displays Non.
unlocking all talk group IDs
Hold down L/O while searching until you
hear two short beeps. You can check all
locked out IDs. Hold down L/O while
you are reviewing all locked out IDs. The
scanner beeps twice. All locked out IDs in a
Notes