Filter
Top Products
78
Beyond the Basics
11. Press •/CLR /DELAY. The scanner
returns to the previous screen.
Repeat steps 5 through 10 to program
additional confi gurations.
turning the Motorola
disconnect tone detect function
On/Off
When the Motorola disconnect tone
detect function is disabled, the scanner
looks for squelch before returning to the
control channel instead of waiting for the
disconnect tone. Only in rare instances
will you need to adjust the default settings.
The condition to return to control channels
depends on whether the signal is present
or not.
1. Select the trunking programming mode
and the bank you want to change.
2. Press S or T to select Motorola Type 2
or Motorola Type 1, then press E/PGM.
3. Press S or T to select Eot, then press
E/PGM.
4. Press S or T to select Eot ON or Eot
OFF, then press E/PGM.