Filter
Top Products
Chapter 3: Multi-Platform Client and Raritan Remote Client
118
MPC Connection Properties - Generation 2 Devices
To adjust connection properties:
1. Choose Connection > Properties or click the Connection Properties
button in the toolbar. Update the settings in the Compression
tab.
2. Set the Connection Speed.
Use this setting to manually adjust the connection speed to
accommodate bandwidth constraints. Devices can automatically
detect available bandwidth and not limit bandwidth use. However,
you can also adjust this usage according to your needs. Depending
on the Raritan device in use, different options may be available:
Auto Detect
1G Ethernet
100mb Ethernet
10mb Ethernet
1.5mb (Max DSL/T1)
1mb (Fast DSL/T1)
512 kb (Medium DSL/T1)
384 kb (Slow DSL/T1)
256 kb (Cable)
128 kb (Dual ISDN)
56 kb (ISP Modem)
33 kb (Fast Modem)
24 kb (Slow Modem)
Note: KX II-101 does not support 1G Ethernet.
3. Set the Color Depth.
Devices can dynamically adapt the color depth transmitted to remote
users in order to maximize usability in all bandwidths. Select from
among the options in the drop-down list. Depending on the Raritan
device in use, different options may be available:
15-bit RGB Color
8-bit RGB Color
4-bit Color
4-bit Gray
3-bit Gray