Filter
Top Products
8 UST-IP USER MANUAL
Connect to UST-IP Remotely
Having completed the physical installation of UST-IP, you are now ready to establish an initial network
connection. Below are basic instructions for doing so. Please see Chapter 3: Raritan Remote Client for
detailed instructions, being sure to review the “Remote KVM Console Control” and “Color Calibration”
sections to optimize your UST-IP performance.
Launch Raritan Remote Client (RRC)
1. Log into any Windows-based computer with network access to UST-IP.
2. If you are using Windows NT, 2000, or XP, ensure that you are not a “restricted” user.
3. Launch Microsoft Internet Explorer. Ensure that your Internet Explorer security settings allow the
download and execution of ActiveX controls.
Note: The Windows default security setting of “Medium” is sufficient.
4. In the URL Address field, type the IP address you assigned to UST-IP in Step II-6. Press [ENTER] to
load and launch the web access client.