Filter
Top Products
20 UST-IP USER MANUAL
Remote KVM Console Control
After using the RRC Navigator to establish a connection with an UST-IP unit (see the previous section:
Establishing a New Connection), the Navigator entry corresponding to the UST-IP unit will expand to
show all ports on the UST-IP enabled for remote access.
To establish a remote KVM console connection, simply double-click on the KVM path that you would like
to control.
Upon connection, UST-IP displays the real-time video output by the KVM switch or server that is
connected to your UST-IP KVM port. This video is compressed and encrypted according to the
configuration settings specified by the administrator (see Chapter 4).
Once connected to a KVM switch or a server, you obtain complete, low-level control of the KVM console
as if you were physically located next to the KVM switch or server.
When your mouse pointer lies within the Remote Desktop area of RRC, mouse movements and clicks are
transmitted to the KVM switch or remote server connected.
Remote Desktop Area