Filter
Top Products
16 UST-IP USER MANUAL
• Modem: Select the modem, as configured in Windows, which RRC should use to dial and connect to
your Raritan device.
Select a TCP Port to use:
• Use Default Port Number: UST-IP is configured by default to use TCP Port 5000 for communicating
with RRC. UST-IP can be configured to use a different TCP Port (see Chapter 4: Administrative
Functions, Network Configuration); if so, uncheck the Use Default Port Number option, and enter
the configured TCP Port to be used.
5. Other tabs on this screen include:
Compression Tab
Settings in the Compression Tab are adjustable via the RRC client, and therefore are not necessary for pre-
configuration in the Connection Profile. Should you wish to pre-configure these settings, however, refer to
the section in this chapter labeled, Connection and Video Properties.
Security Tab
If you have configured your UST-IP unit to use a private group key, you must enter it here in order to be
authorized to initiate a connection with that UST-IP unit. Click [OK] when you have completed the fields.
When you have completed the Connect and Security screens, click [OK] to finish creating the connection.