( 25 / 76 )
Chapter 3. Setting Up
This chapter describes switch settings required for using this product and how to connect this product to the PC7501 and
the target system.
3.1 Selecting Clock Supply ............................................................................................................... 26
3.2 Using an Internal Oscillator Circuit Board ..................................................................................27
(1) Kinds of Oscillator Circuit Boards ....................................................................................... 27
(2) Replacing an Oscillator Circuit Board .................................................................................. 27
(3) Using the Oscillator Circuit Bare Board ............................................................................... 29
3.3 Using the Oscillator Circuit on the Target System ...................................................................... 30
3.4 Using the Internal Oscillator Circuit ........................................................................................... 31
3.5 Setting Switches .......................................................................................................................... 31
3.6 A-D Conversion Bypass Capacitor.............................................................................................. 35
3.7 Connecting the PC7501 ............................................................................................................... 36
3.8 Connecting the Target System..................................................................................................... 37
(1) Connecting to a 100-pin LCC Socket ................................................................................... 38
(2) Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 1) ............................................. 39
(3) Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 2) ............................................. 40
(4) Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 3) ............................................. 41
(5) Connecting to a 100-pin 0.5-mm-pitch Foot Pattern (Part 1) ............................................... 42
(6) Connecting to a 100-pin 0.5-mm-pitch Foot Pattern (Part 2) ............................................... 43
(7) Connecting to a 100-pin 0.5-mm-pitch Foot Pattern (Part 3) ............................................... 44
(8) Connecting to a 144-pin 0.5-mm-pitch Foot Pattern ............................................................ 45