( 36 / 76 )
3.7 Connecting the PC7501
Figure 3.9 shows how to connect the PC7501 and the emulation probe.
Figure 3.9 Connecting the PC7501 and emulation probe
CAUTION
Note on Connecting the Cable:
• When connecting the emulation probe, be sure to hold the both sides of the emulation
probe horizontally and insert it directly.
•Connect the PCA7501EPBA board to the M3T-FLX160-EPB.
•Always shut OFF power before connecting the emulation probe. Otherwise, internal
circuits may be damaged.
M3T-FLX160-EP
B
M30850T-EPB
Note: Connect the PCA7501EPBA board side to the M3T-FLX160-EPB.