( 58 / 76 )
Chapter 5. Specifications
5.1 Specifications
Table 5.1 lists the specifications of the M30850T-EPB.
Table 5.1 Specifications of the M30850T-EPB
PC7501
M32C/80, 84, 85 and 85 Groups
(Supports up to max. 512K + 4K of ROM, 24K of RAM)
Single-chip mode
Memory expansion mode
Microprocessor mode
(1) 516 KB for internal ROM of MCU
(Fixed F000h--FFFFh, F80000h--FFFFFFh, maximum operating
frequency: 32 MHz)
(2) 4 MB for expansion area (changeable)
(Possible to allocate by 256 KB or 1 MB, maximum operating
frequency: 32 MHz, 1ø + 1ø)
VCC1 = VCC2 = 4.2 to 5.5 V: 32 MHz
VCC1 = VCC2 = 3.0 to 5.5 V: 24 MHz
XIN-XOUT Internal oscillator circuit board (OSC-3)
Switchable to an oscillator circuit of the target system
or the internal oscillator circuit input
XCIN-XCOUT Internal oscillator circuit board (32.768 kHz fixed)
Switchable to an oscillator circuit of the target system
3.0 to 5.5 V
5 to 35°C (no dew)
-10 to 60°C (no dew)
12 V supplied from AC adapter
For 144-pin 0.5-mm-pitch LQFP (144P6Q-A):
M3T-FLX-144NSD (not included)
For 100-pin 0.5-mm-pitch LQFP (100P6Q-A):
(1) M30800T-PTC (included) + M3T-100LCC-QSD (not included)
(2) M30800T-PTC (included) + M3T-100LCC-DMS (not included)
+ M3T-FLX-100NSD (not included)
(3) M3T-F160-100NSD (not included)
For 100-pin 0.65-mm-pitch QFP (100P6S-A):
(1) M30800T-PTC (included) + M3T-100LCC-DMS (not included)
+ M3T-FLX-100NRB (not included)
(2) M30800T-PTC (included) + M3T-100LCC-DMS (not included)
+ M3T-DUMMY100S (not included)
(3) M30800T-PTC (included) + M3T-100LCC-DMS (not included)
+ M3T-DIRECT100S (not included)
For 100-pin LCC socket:
M30800T-PTC (included) + IC61-1004-051 (included)
Emulator
Applicable MCU
Usable mode
Emulation memory
Maximum operating frequency
Clock supply
Operating voltage
Operating temperature
Storage temperature
Power supply to emulator
Connection to target system
(see "3.8 Connecting the Target
System" on page 37)