Filter
Top Products
238
2. Selecting a semaphore waiting queue
[( Definition format )]
Symbol
[( Definition range )] TA_TFIFO or TA_TPRI
[( Default value )] TA_TFIFO
Select a method in which tasks wait for the semaphore. If TA_TFIFO is selected, tasks are enqueued in order of
FIFO. If TA_TPRI is selected, tasks are enqueued in order of priority beginning with the one that has the highest
priority.
3. Initial value of semaphore counter
[( Definition format )]
Numeric value
[( Definition range )] 0 to 65535
[( Default value )] 1
Define the initial value of the semaphore counter. This value must be less than the maximum value of the sema-
phore counter.
4. Maximum value of the semaphore counter
[( Definition format )]
Numeric value
[( Definition range )] 1 to 65535
[( Default value )] 1
Define the maximum value of the semaphore counter.
[(Data queue definition )]
This definition must always be set when the data queue function is to be used.
<< Format >>
// Dataqueue Definition
dataqueue[
ID No.
]{
name =
ID name
;
buffer_size =
Number of data queues
;
wait_queue =
Select data queue waiting queue
;
};
:
:
The ID number must be in the range 1 to 255. The ID number can be omitted. If omitted, ID numbers are automatically
assigned in order of numbers beginning with the smallest.
<< Content >>
For each data queue ID number, define the items described below.
1. ID name
[( Definition format )]
Symbol
[( Definition range )] None
[( Default value )] None
Define the name by which the data queue is specified in a program.