Filter
Top Products
256
8.2.3 Configurator Start Procedure
Start the configurator as indicated below.
C:\> cfg100 [-vV] [-Eipl] [-Wipl]
Configuration file name
Normally, use the extension .cfg for the configuration file name. The file name can includes space character with “”.
Command Options
-v Option
Displays the command option descriptions and detailed information on the version.
-V Option
Displays the information on the files generated by the command.
-Eipl Option
Enable the check function of an IPL value. When System_IPL! = 7 in the con-figuration file, the error message "
system_IPL should be 7" is displayed and the execution of cfg100 is stpped.
-Wipl Option
Enable the check function of a IPL value. When System_IPL! = 7 in the con-figuration file, the error message "
system_IPL should be 7" is displayed..
8.2.4 Precautions on Executing Configurator
The following lists the precautions to be observed when executing the configurator:
• Do not modify the startup program name and the section definition file name. Otherwise, an error may
be encountered when executing the configurator.