Filter
Top Products
258
cfg100 Error : System timer's vector <x>conflict near line xxx
A different vector is defined for the system clock timer interrupt vector. Confirm the vector No.x for interrupt
vector definition.
cfg100 Error : XXXX is not defined (xxxx.cfg)
"XXXX" item must be set in your configuration file.
cfg100 Error : System's default is not defined
These items must be set int the default configuration file.
cfg100 Error : <XXXX> is already defined near line xxx (xxxx.cfg)
XXXX is already defined. Check and delete the extra definition.
cfg100 Error : XXXX[x] is already defined near line xxx (default.cfg)
cfg100 Error : XXXX[x] is already defined near line xxx (xxxx.cfg)
The ID number in item XXXX is already registered. Modify the ID number or delete the extra definition.
cfg100 Error : XXXX must be defined near line xxx (xxxx.cfg)
XXXX cannot be omitted.
cfg100 Error : SYMBOL must be defined near line xxx (xxxxcfg)
This symbol cannot be omitted.
cfg100 Error : Zero divide error near line xxx (xxxx.cfg)
A zero divide operation occurred in some arithmetic expression.
cfg100 Error : task[X].stack_size must set XX or more near line xxx (xxxx.cfg)
You must set more than XX bytes.in task[x].stack_size.
cfg100 Error : "R2R0" must be contained in task[x].context near line xxxx (xxxx.cfg)
You must select R2R0 register in task[x].context.
cfg100 Error : Can't specify B or F switch when os_int=YES. (xxxx.cfg)
"/B" and "/F" switch cannot be specified to a kernel interrupt handler.
cfg100 Error : Can't specify B and E switch at a time when os_int=NO. (xxxx.cfg)
"/B" and "/E" switch cannot be specified to the non-kernel interrupt handler at a time.
cfg100 Error : interrupt_vector[%ld].os_int must be YES. (xxxx.cfg)
When a kernel interrupt mask level is 7, an interrupt handler must be kernel interrupt handler..
cfg100 Error : system_IPL should be 7. (xxxx.cfg)
When "-Eipl" is specified as the command option of configurator, the value of sysrem_IPL of a system definition
must be 7.
cfg100 Error : Timer counter value is overflow. (xxxx.cfg)
Overflow occurred in the operation of a timer count. A timer cannot be initialized with the time tick cycle and
peripheral clock which were specified. Please initialize the timer and sets clock.timer to “OTHER”.