Filter
Top Products
Messages Comment Action
USB Upload : FAIL
Can not open USB printer driver
while F/W file is transmitted.
Check USB cable connection.
Check the installation of USB
Print Driver if it is available.
Check MFP status if it is
available.
F/W file transmission can not be
completed.
(Transmission will be canceled if
timeout.)
Check USB cable connection.
Check USB Print Driver if it is
available.
Check MFP status if it is
available.
Can't open ROM file.Please
check ROM file.
F/W file does not exist.
Check the download file name
in setting.ini. "ImageFile="
Check the
download file and fw
update tool is in the same folder.
Can't open Eng. ROM file.
Please check Eng. ROM file.
Engine F/W file does not exist.
Check the download file name
in setting.ini. "EngImageFile="
Check the
download file and fw
update tool is in the same folder.
New Version: Update FW AIO FW is transmitting Not available
Eng FW version: Update Eng
FW
Engine FW is transmitting Not available
Firmware is Updating... AIO FW is updating Not available
Eng Firmware is Updating... Engine FW is updating Not available
FW Update Done. *** Please
reboot the Machine.***
F/W update is completed. Please reboot the Machine.
Message for Network update
Messages Comment Action
Connecting… Connect to MFP. Please wait a moment.
Net Upload : End of data
Update F/W successfully.
(Transmission Time: <30 sec)
Please reboot MFP after panel
shows reboot message.
Firmware Updating
113
5