Filter
Top Products
Friction Pad
1. Remove the paper tray unit from the machine before removing the friction pad.
2. Friction pad [A] (2 hooks, 1 spring)
When reinstalling the friction pad follow this order:
1.
Replace the spring.
2. Insert the right side of the friction pad first, followed by the left side.
3. Gently push the friction pad down into the slot and then pull forward very slightly.
Paper End Sensor
1. Set the machine with the rear side facing down, resting on the table.
2. Paper end sensor [A] (hooks, x 1)
By-pass Feed Roller
1. Front cover ( p.23)
4. Replacement and Adjustment
52
4