Filter
Top Products
Engine Maintenance
Registration
Horiz.Bypass
Adjusts the horizontal registration for the bypass tray. If the
machine settings are reset to the factory defaults, this value
does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Vert. Bypass Plain
Paper
Adjusts the vertical registration of plain paper for the bypass
tray. If the machine settings are reset to the factory defaults,
this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Vert. Bypass Thick
Paper
Adjusts the vertical registration of thick paper for the bypass
tray. If the machine settings are reset to the factory defaults,
this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Vert. Bypass Thin
Paper
Adjusts the vertical registration of thin paper for t the bypass
tray. If the machine settings are reset to the factory defaults,
this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Horiz. Dup. Back
Adjusts the horizontal registration the back side in duplex
mode. If
the machine settings are reset to the factory defaults,
this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Registration
Vert. Dup. Plain
Paper
Adjusts the vertical registration of plain paper for the back side
in duplex
mode. If the machine settings are reset to the factory
defaults, this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Vert. Dup. Thin
Paper
Adjusts the vertical registration of thin paper for the back side
in duplex
mode. If the machine settings are reset to the factory
defaults, this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Vert. Dup. Thick
Paper
Adjusts the vertical registration of thick paper for the back side
in
duplex
mode. If the machine settings are reset to the factory
defaults, this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
5. System Maintenance Reference
90
5