Filter
Top Products
The following pages explain the symbols that appear in certain columns of the re -
ports.
The Mode Column
See the bottom of the TCR for a full listing of the symbols on the TCR.
On other reports such as the File List, a code is given, informing the type of com -
munication. These codes are explained below.
SAF_TX Memory Transmission SUB_RX Substitute Reception
IMM_TX Immediate Transmission FWD_TX Forwarding
CNF_TX Confidential Transmission IMM_RX Normal Reception
TONER Transmission of Toner
Order Form
LCK_RX Reception with Memory
Lock
POL_TX Polling Transmission TRN_TX Transfer Request
POL_RX Polling Reception TRN_RX Reception of document
from Transfer Requester
prior to broadcasting
CNF_RX Confidential Reception RPT_RX Reception of Transfer
Result Report
Also, in the Address and Group Name column of the File List, for a Transfer Re -
quest operation, you may see the following codes.
TRN_ST Indicates that the number to the right is a transfer broadcasting
station.
REC_ST Indicates that the number to the right is an end receiver in the
transfer broadcasting operation.
TRN_1 Indicates that the number to the right is the first transfer station in
a two-step transfer operation.
TRN_2 Indicates that the number to the right is the second transfer station
in a two-step transfer operation.
TRN_RQ Indicates that the number on the right is the station that requested
the transfer request for this file, using your machine as a transfer
broadcasting terminal.
SECTION 5. PRINTING REPORTS
93