Filter
Top Products
6. Scroll through the stored RTIs/CSIs on the screen with ↓ .
❐ It is not possible to edit previously stored RTIs/CSIs; if you wish to do so,
you must delete the incorrect label and store a new one.
❐ To delete the displayed RTI/CSI: Clear
❐ When you have finished: No . Go to step 2.
NOTE: ❐ After programming this feature, you must switch it on for it to
take effect. See page 71 for how to do this.
❐ Messages from senders that have RTI/CSIs that match those
that were input using the above procedure will be printed using
the upper cassette.
❐ If there is no paper in the upper cassette, substitute reception
will take place.
❐ If there is no paper in the lower cassette(s), the upper cassette
will be used for reports.
2-6. Multi-sort Document Reception (Memory Card or Hard Disk Required)
1. Function 6 0 2 2 2 2
7 7
2. Input the number of copies that you
need, then press Yes .
Copies of incoming faxes will be col-
lated.
NOTE: Maximum number of copies: 9
To use Multi-sort Document Reception, you must switch it on. See
page 74 for how to do this.
MULTICOPY RX ENTER 1-9 COPY
ENTER # COPY: 1 COPY(S)
YES
TO END
SECTION 3. ADVANCED FEATURES
52