Filter
Top Products
Code Possible Cause
0-24
The memory may be full, and there may be a problem with your
printer, such as a jam or running out of paper or toner. Wait for some
space to appear in the memory, then solve the problem with your
printer.
If the memory was not full, substitute reception may have been
disabled; switch substitute reception on using digit 0 of user
parameter switch 05.
0-70
There is a problem with the network or with the machine at the other
end.
1-00
Document jam
Improperly inserted document
1-01
Document length exceeded the maximum limit
Same as for code 1-00
2-xx Possible fault in your machine
4-00
The page took too long to send. Send again at a lower resolution, or
without halftone. The line may be bad.
4-01 Bad line. Telephone line at rear of machine disconnected
4-02 The received page was too long.
4-10 ID codes did not match. Co-ordinate ID codes with the other party.
5-20
5-21
Insufficient memory to receive the message. When the pages in
memory have been printed, ask the other party to resend.
5-25 Your machine has a problem.
6-01
6-02
Poor line condition or a problem with your machine
6-05
Poor line condition, a problem with the machine at the other end, or
a problem with your machine
6-06
A problem with the machine at the other end, or a problem with your
machine
6-08 A problem with the machine at the other end
6-09
6-10
A problem with the machine at the other end, or a problem with your
machine
9-07 Copy jam at the cassette entrance
9-08 Copy jam inside the machine
9-09 Copy jam at the feed-out area
9-17
9-20
9-22
9-23
9-24
There is a problem with your printer.
SECTION 7. SOLVING PROBLEMS
124