Filter
Top Products
2-2. User Parameter Settings
1. Function 6 0 2 2 2 2
9 1
Note: At this time, you can print a User Parameter List if you
press → Start .
2. The current settings for switch 00 are now displayed on the bottom line of the
display (the top line shows the settings normally seen in a machine just deliv -
ered from the factory). If the settings for this switch are the way that you want
them, go to step 4.
3. To change the required setting, press a
number from 0 to 7 corresponding to the
digit that you wish to change.
Example: 0 . The value of the digit
changes, in this case from 0 to 1.
Each switch contains 8 digits, which act as on/off switches for various features. The digits are
numbered from 7 to 0, with 7 at the left and 0 at the right.
4. Either:
❐ Scroll through the switches with ↑ and ↓ until the required switch ap -
pears. Then go to step 3.
❐ Finish: Yes Function
The user parameter switches are explained on the following pages.
USER PARAMETER PRINT LIST
DEFAULT: 00000000
SWITCH00: 00000000
YES
TO END
USER PARAMETER PRINT LIST
DEFAULT: 00000000
SWITCH00: 00000001
YES
TO END
SECTION 4. PROGRAMMING THE MACHINE
72