Filter
Top Products
4-18
5
Clean the area around the wiper.
• Dip the clean stick in the cleaning liquid for maintenance, and wipe the space below the wiper guide,
and the space between the wiper slider and ink guard W.
6
Press the key.
• The carriage moves onto the Media Transfer Surface.
7
Clean the cap rubber and cap rubber cover.
• Wipe off the ink sticking to the cap rubber and cap rubber
cover with a clean stick dipped in Cleaning Fluid for
maintenance. (Wipe off so that you can see blue color of
the cap rubber.) Wipe off so that Cleaning Fluid for
maintenance will not remain.
• At this time, the discharge passage is cleaned
automatically.
• Until wiper cleaning is competed, [COMPLETED (NEXT): ENT] is displayed on the screen. After
the work up to the step 6 is completed, press the key. If you press the key
before cleaning is completed, the machine moves to the next washing procedure.
Space below the wiper guide Space between the wiper
slider and ink guard W
Wiper guide
Wiper guide
Ink guard W
Enlarged view of the Wiper Slider
and Ink Guard W
Clean this part along the rail
Do not clean this part
CAP CLEANI NG
COMPLETED ( NEXT ) [ ENT ]
Cap rubber
Cap rubber cover
After cleaningBefore cleaning