Filter
Top Products
Maintaining the Capping Station
4-7
1
1
1
4
Routine Maintenance
8
Clean the wiper slider.
• Wipe off the ink sticking of the figure with a clean stick dipped
in Cleaning Fluid for maintenance.
Wipe off so that Cleaning Fluid for maintenance will not
remain.
9
Set the wiper at the original position.
• Insert the wiper by holding both ends of the wiper.
10
Clean the area around the wiper.
• Dip the clean stick in the cleaning liquid for maintenance, and wipe the space below the wiper guide,
and the space between the wiper slider and ink guard W.
Clean
Projection
Space below the wiper guide Space between the wiper
slider and ink guard W
Wiper guide
Wiper guide
Ink guard W
Enlarged view of the Wiper Slider
and Ink Guard W
Do not clean this part
Clean this part along the rail