Filter
Top Products
Copying
114
2
B Press [Copier / Document Server Features].
C Press [Stamp].
D Press [User Stamp].
E Press [Program / Delete Stamp].
F Press [mProgram], and then press the stamp number you want to program.
G Enter the user stamp name (up to ten characters) with the letter keys, and
then press [OK].
H Enter the horizontal size of the stamp with the number keys, and then press
the {q} key.
I Enter the vertical size of the stamp with the number keys, and then press
the {q} key.
J Place the original for user stamp on the exposure glass, and then press [Start
Scanning].
The original will be scanned, and the stamp will be registered.
K Press [Exit].
L Press [Exit].
The display returns to the User Tools/Counter/Enquiry screen.
M Press [Exit].
Exits settings and gets ready to copy.
Note
❒ Stamp numbers with m already have settings in them.
❒ If the stamp number is already being used, the machine will ask you if you
want to overwrite it . Press [Yes] or [Stop].
❒ Originals cannot be scanned from the ADF when programming the user
stamp.