Filter
Top Products
Copying
142
2
Programs
You can store the frequently used copy job settings in the machine memory and
recall them for future use.
You can store up to 10 programs.
Note
❒ When a specified program is registered as the default, its values become the
default settings, which are displayed without pressing the {Program} key,
when modes are cleared or reset, and after the operation switch is turned on.
See “Programming Defaults in Initial Display”.
❒ Paper settings are stored based on paper size. So if you place more than one
paper tray of the same size, the paper tray prioritized with User Tools (Sys-
tem Settings) will be selected first. See “Tray Paper Settings”, General Settings
Guide.
❒ Programs are not deleted by turning the power off or by pressing the {Clear
Modes} key.
Reference
See p.146 “Programming Defaults in Initial Display”.
See “Tray Paper Settings”, General Settings Guide.