Filter
Top Products
Copying
36
2
When Copying onto Custom Size Paper
Makes copies onto custom size paper from the bypass tray.
A Open the bypass tray, and then insert the paper face-down until you hear
the beep.
B Align the paper guide to the paper size by pinching the clip.
C Press [Bypass], and then press the {q} key.
D Press [Custom Size].
E Enter the horizontal size of the original with the number keys, and then
press [q] .
F Enter the vertical size of the original with the number keys, and then press
[q] .
G Press [OK].
H Place the original, and then press the {Start} key.
I When the copy job is finished, press the {Clear Modes} key to clear the settings.
Note
❒ If you make a mistake in step
E
or
F
, press [Clear] or the {Clear/Stop} key,
and then enter the value again.
❒ To register the custom size entered in step
F
, press [Program] and then
press [Exit] in the confirmation screen.