Filter
Top Products
Document Server
154
3
Note
❒ When interrupting the scan, press the {Clear/Stop} key. Pressing [Continue]
from the confirmation screen resumes the scan. Pressing [Stop] deletes the
scanned images and the original on the automatic document feeder (ADF)
will be ejected.
❒ As a password is set, the key mark will be displayed on the left side of the
document.
❒ As scan of the document is completed, a list will be displayed. If the list
does not appear, press [Scanning Complete].
❒ According to the factory default, the documents stored on the Document
Server are deleted three days (72 hours) after the storing date. You can can-
cel the automatic document deletion or select other period than three days
for the automatic deletion. See “Administrator Tools”, General Settings
Guide.
❒ When storing a document, which is not to be automatically deleted, in the
Document Server, specify [Off] for “Auto Delete File in Document Server”
before storing the document. If you specify [On] for “Auto Delete File in
Document Server” after that, Auto Delete File in Document Server will be
enabled for the documents being stored after the setting.
❒ When storing a document in the Document Server after storing it from the
copy feature, be sure that its copy is completed.
Reference
See “Administrator Tools”, General Settings Guide.
To register or change a user name (When using a user name registered to the Address
Book)
Following describes the procedure for registering or changing a user name to be
attached to a stored document.
A Press [Scan Original].
B Press [User Name].
The user name input screen will appear.
C Select the user name and then press [OK].