Filter
Top Products
Replacing the Photoconductor Drum
MAINTAINING YOUR MACHINE
Replacing the Photoconductor Drum
The photoconductor receives the print image before it is transferred to paper.
To ensure optimal quality, replace them every 30,000 copies.
If the following display appears, replace the photoconductor.
fiEF’L&::E F’I: v
!:;ET [II:II::. I:IR DIAL. NI:I.
To check how many sheets you’ve printed, please refer the section titled
“Counters” (See page 52.)
Caution:
Do not expose the photoconductor drum to light for an extended
period.
Caution: Do not touch or scratch the drum: it cannot be repaired. Any
scratch on the drum would be reproduced on prints.
Caution: Do not touch any parts other than those specified in the proce-
dure.
Caution: Though organic photoconductor drums are safe for the environ-
ment, dispose of used drums according to local regulations.
Remove the print tray.
Open the top cover unit and lift it
until it locks in place.
89