Filter
Top Products
Using the Stamp
FAXING
The machine stores your message and dials the first number (or, if you
selected Send Later, it will return to standby mode and the fax message will be
sent at the time that you selected). Send later: see page 20 .
For users who place the document on the contact glass
After a page has been stored, the machine asks you to place the next page on
the exposure glass. The indicator shows how much time you have left to place
the next page on the feeder and press Start key.
You have 60 seconds. If you do not place a page on the exposure glass and
press Start within the remaining time, the machine will start to dial.
Either:
Place the next page on the exposure glass and press Start. The page
will be scanned and stored.
or
If you have no more pages, press Yes. The machine will dial the first
destination (or, if you selected Send Later, it will return to standby mode
and the fax message will be sent at the time that you selected.)
Using the Stamp
Press the Stamp key to achieve the transmission verification stamp.When the
Stamp indicator is lit, the machine stamps a small mark on the bottom of each
page. During memory transmission, the stamp indicates that the page was
successfully stored. For immediate transmission, it shows that the page was
sent successfully. You must switch the stamp on before you press Start, or the
machine will not stamp the first page.
If you wish to change the Stamp default setting, set by user parameter switch
00, bit 0.
0: Verification stamp off
1: Verification stamp on
25