Filter
Top Products
RDS (Remote Diagnostk System)
Troubleshooting
RDS (Remote Diagnostic System)
Overview
If your machine has a problem, a service technician can perform various
diagnostic tasks over the telephone line from the service station to try to find
out what is wrong with your machine. The service technician can also use RDS
to change some of your machine’s settings if you request it.
For RDS to work, you must switch it on before the service technician starts the
RDS operation on your machine.
For some RDS operations, it may be necessary for you to stay near the
machine.
Switching RDS On/Off
Before your machine can accept incoming calls from an RDS, you have to
switch RDS on using Function 62. If it is switched off, the machine will not
accept treatment from an RDS.
D
Q
H
n
1
H
Press Function, 6, and enter the
access number on page 121.
Then press 6,2. And press Yes.
SELECT L:f NE
Scroll through the list of features
with 4 and ) until the screen is as
shown opposite.
Press Yes.
Change the on/off setting by
pressing 4 or ).
Finish: Yes and Function
Note: RDS is automatically switched off 24 hours after you switch it on.
109