Filter
Top Products
Troubleshooting
Caution: Do not attempt to make any repairs other than those described
in this manual. Removing covers may expose you to dangerous
voltages and other risks. Refer all servicing to qualified personnel.
Check the indicators and the display panel. The indicators light if there are any
problems. Check the description in the display.
If an Indicator Lights Up on the Operation Panel
If ERROR PRESS STOP KEY appears in the display:
If the Communicating indicator is not lit, press Stop.
If the Communicating indicator lit, wait until it goes out, then press Stop.
The Receive File indicator is lit: You’ve received a fax message which is now
stored in the machine. See page 16 for instructions on how to print it out.
The Check Display indicator is lit: Read the message on the LCD display
and check the descriptions listed on page 114.
&I is blinking or lit: You are either out of toner or about to be out of toner. See
page 86 to change the toner cassette and the cleaning pad.
&J is lit: You’re out of paper. See page 80 for adding paper to the front
cassette and see page 152 for adding paper to the side cassette.
One of the Printer indicators is lit: please refer to the Printer Interface Operator
Manual for instructions.
Other Possible Problems
You want to take out the document
Open the document feeder, and take out the document.
Caution: Do not pull out the document without opening the auto document
feeder, or you will damage the scanning mechanism.
100