Filter
Top Products
FAXING
Sending the Same Message to Many Destinations
Dial a fax number in one of the
following ways.
b) Quick Dial
c) Speed Dial
d) Group Dial
Example:
Example: QuickDial 12
Exomple:SpeedDlallO
Method 1 *
1-1
08 of the Quick Dial
Elm
key.
Method 2 **
20 of the Quick Dial
key and 1 of the ten
*: This is the example of the case where Group Dial is programmed in 08 of the
Quick Dial key.
**: This is the example of the case where Quick Dial key 20 is programmed as
the Group key, and Group dial number 1 is programmed.
Programming the Quick Dial: see page 28.
Programming the Speed Dial: see page 32.
Programming the Group Dial: see page 37.
Programming the Group key: see page 41.
Note: The maximum destinations you can dial using the ten key pad is 49.
However, this limitation is up to the machine condition.
If you enter the wrong number,
press No or Clear and enter
again.
Clear to delete one digit.
No to delete the whole number.
tl
Press Yes (not the Start key).
You’ll get:
TRANSMIT DIAL/START
[II& NE::(T F@,::r: Nl.jMBER
(When you set the document to
the feeder)
,L$[IF T::(
DIAL/E:TART
III&. NEXT F@,:< Niq!MBEF;
Repeat steps 2 and 3 until all destinations are entered.
Press the Start key.
24