Filter
Top Products
MAINTAINING YOUR MACHINE
Make sure the fence is set in the
groove on the paper cassette.
Setting / Adding the Paper (a)
H
* Change the paper size plate (lo-
cated at the front of the feed unit).
To remove an existing plate, push
in the tab at the base while lifting
the plate out from above (see dia-
gram). Insert a plate with the ap-
propriate paper size engraved on
the front.
Fan the paper. Make sure the
edges are uniformly aligned and
place the paper into the unit with
the side on you wish to print face
up. Check the paper fits under
the metal corners.
0
If there is space between the pa-
per and fences, the paper will not
be fed properly. To avoid this,
carefully move in each fence until
it is flush with the paper.
Do not fill up the cassette past
the load limit marker.
0
;
Replace the feed unit to its origi-
nal position.
84