Filter
Top Products
Setting / Adding the Paper (l&
MAINTAINING YOUR MACHINE
* Pinch in the green lever on the
rear fence and slide it until it
matches the paper size printed
on the base of the tray. Release
the lever making sure it fits in the
groove.
0
, Flex the new stack of paper a few
times.
Press the plate (or paper when
you add paper) until the bottom
plate locks itself.
0
I
Put the stack in the drawer. Do
not fill the drawer past the load
limit marker and make sure the
stack of paper fits under the cor-
ners. Push the side and rear
fence toward the paper.
Note: If there is space between
the paper and fences, carefully
move in each fence until it is flush
with the paper.
81