Ricoh PJ WX3231N Projector User Manual


 
101
Others
List of supported signals (Y/PB/PR input)
Signal format fh(kHz) fv(Hz)
480i(525i)@60Hz
15.73 59.94
480p(525p)@60Hz
31.47 59.94
576i(625i)@50Hz
15.63 50.00
576p(625p)@50Hz 31.25
50.00
720p(750p)@60Hz
45.00 60.00
720p(750p)@50Hz
37.50 50.00
1080i(1125i)@60Hz
33.75 60.00
1080i(1125i)@50Hz 28.13
50.00
1080p(1125p)@60Hz
67.50 60.00
1080p(1125p)@50Hz 56.25
50.00
List of supported signals (Video, S-Video input)
Video mode fh(kHz) fv(Hz) fsc(MHz)
NTSC 15.73 60 3.58
PAL 15.63 50 4.43
SECAM 15.63 50 4.25 or 4.41
PAL-M 15.73 60 3.58
PAL-N 15.63 50 3.58
PAL-60 15.73 60 4.43
NTSC4.43 15.73 60 4.43
List of supported signals (HDMI input)
Since the resolutions or frequencies input from a computer or picture device vary and may
be different from the signals listed below, the images may not appear correctly or some
signal formats may not be detected properly and even it may fail to display the images. If that
happens, set your computer or the device so that an input signal listed below can be received.
Resolution Mode
Refresh rate or
V-frequency (Hz)
H-frequency
(kHz)
Clock
(MHz)
720 x 480 480p(525p)
59.94 31.469 27.000
720 x 576 576p(625p)
50.00 31.250 27.000
1280 x 720
720p(750p)
60.00 45.000 74.250
720p(750p)
50.00 37.500 74.250
1920 x 1080
1080i(1125i)
60.00 33.750 74.250
1080i(1125i)
50.00 28.125 74.250
1080p(1125p)
60.00 67.500 148.50
1080p(1125p)
50.00 56.250 148.50
640 x 480
VGA_60 59.940 31.469 25.175
VGA_72 72.809
37.861 31.500
VGA_75 75.000 37.500 31.500
800 x 600
SVGA_60 60.317 37.879 40.000
SVGA_72 72.188
48.077 50.000
SVGA_75 75.000 46.875 49.500
1024 x 768
XGA_60 60.004 48.363 65.000
XGA_70 70.069 56.476 75.000
XGA_75 75.029 60.023 78.750
* 1280 x 800
WXGA_60 59.880 49.580 83.300
1280 x 1024
SXGA3_60 60.020 63.981 108.000
1400 x 1050 SXGA+ 59.978 65.317 121.750
* : 1280 x 800 is only available for WX3231N