Filter
Top Products
74
Notes
It may not be possible to transmit the images from a movie player or other video applications.
When using “Update automatically”, the transmitted image refresh rate depends on the
performance of the computer you are using and the surrounding radio wave environment.
The projector screen may have a few differences from the computer screen.
The projector ID is the MAC address of the wired LAN inserted into the projector.
Playing contents protected by copyright is not supported.
To transmit sound, press the button then launch the application that plays the contents
including the sound. When you operate the projector using Windows Vista
®
or Windows
®
7,
“Switching audio play device” window may be displayed after pressing the start button
of Network Utility. If this window is displayed, follow the instruction to switch the audio play
device, and then launch the application that plays the contents including sounds.
If no sound can be heard from the computer though the connection is stopped, re-launch
the application that plays the contents including the sound.
Transmission may not be conducted depending on the sound type.
Sound cannot be transmitted if multiple projectors are selected.
The audio signals transmitted by a computer become mono.
Network Mouse Controller function may not work properly depending on the network
condition.
If you make any changes in the screen display settings of the window without launching
Network Utility, the settings you made will be erased and not be reflected even if you
check Switch to the last screen settings when using next time checkbox.
For multiscreen function, the images on the computer’s desktop can only be selected
to transmit for display. Note that the application software are not available to select as
transmission images.
•
•
•
•
•
•
•
•
•
•
•
•
•
Using the Network Utility (Continued)