Filter
Top Products
33
Operations
Cutting off the picture and sound temporarily
(Mute)
When you want to project the images of another projector or overhead
projector temporarily, this projector’s images and sound can be turned
off using the MUTE button.
Press the remote control’s MUTE button or the RETURN/
MUTE button on the projector control panel.
The picture and sound are cut off. (Pressing the MUTE button or
the RETURN/MUTE button again cancels the Mute function and
restores the picture and sound.)
The RETURN/MUTE button on the control panel cannot be used for
muting in the following situations:
• The projected image is resized.
• A menu is displayed.
• USB memory-input is selected.
• Network input mode is selected and no signal is input through the
network.
Notes
The icon will appear while mute is in effect.
Operating any other function will also cancel the muting.
Changing picture mode
The projected image mode can be selected using the NCE button.
Press the remote control’s NCE button and select with the
buttons.
After selection, apply it by pressing the
button.
For computer, HDMI, USB memory and Network-input images, the
following settings are available.
Dynamic/Standard/Photographic
For Y/P
B
/P
R
, Video and S-video-input images, the following
settings are available.
Vivid/Standard/Cinema
Note
You can also change the picture mode using [NCE] of the Image
adjustment menu
p.37
.
Changing screen size
The screen size for the projected image can be changed using the
SCREEN SIZE button.
Press the remote control’s SCREEN SIZE button.
Pressing the button switches in turn as follows:
X3241N :
Normal/Full/Thru/Wide
WX3231N :
Normal/Full/Thru/4:3 zoom
•
•
•
•
•
Remote
control
Remote
control
Remote
control