Filter
Top Products
37
Operations
The image adjustment menu
Use this menu to set or adjust image related items. Items that can be set or adjusted
are marked “Yes”, and those that cannot are marked “No”. (When an item is masked, it
indicates that you cannot select it using the current input.)
Item Description
Computer
Y/PB/PR
HDMI
Video
S-video
Network USB memory
Contrast
Adjust the image contrast.
Lower
Higher
Yes Yes Yes Yes Yes Yes Yes
Brightness
Adjust the brightness of the image.
Darker Brighter
Yes Yes Yes Yes Yes Yes Yes
Color
Adjust the color of the image.
Lighter
Deeper
No Yes No Yes Yes No No
Sharpness
Adjust the sharpness of the image.
Softer Sharper
Yes Yes Yes Yes Yes Yes Yes
Noise
reduction
*1
Set the function to reduce
screen noise.
On (Enable)
Off (Disable)
No Yes No Yes Yes No No
NCE
Switches the picture mode.
Press . Toggle the NCE
mode with . See
p.33
for details.
Yes Yes Yes Yes Yes Yes Yes
R–level
Adjust red of the image color.
Less red
More red
Yes Yes Yes Yes Yes Yes Yes
G–level
Adjust green of the image color.
Less green More green
Yes Yes Yes Yes Yes Yes Yes
B–level
Adjust blue of the image color.
Less blue
More blue
Yes Yes Yes Yes Yes Yes Yes
NTSC
mode
*2
Set the black level with .
US : NTSC (US) mode
JAPAN : NTSC (JAPAN) mode
No No No Yes Yes No No
RGB input
range
*3
Set the RGB input range with
.
Standard
: When black color
becomes lighter.
Full :
When dark area
becomes too dark.
No No Yes No No No No
Auto
setting
Automatically adjusts items
such as the sampling phase
depending on the type of
input signal.
Yes No No No No No No
Equalizer Reduce noise on the screen.
Adjust with .
No No Yes No No No No
Note
Menu adjustments and settings will not be saved, if the power cable is disconnected or
the power goes out before the adjustments and settings have been completed and the
menu display has been closed.
•