Filter
Top Products
87
Network/
USB memory
Setting up the projector using a Web browser
How to use the “Projector Configuration Tool”
The “Projector Configuration Tool” uses the Web server features of the projector to set
up the projector using the network.
When using the “Projector Configuration Tool”, set up the Network connecting the
projector and the computer.
1
See “Checking the projector status”
p.60
to display
information on the screen and write down the IP address.
2
Invoke Internet Explorer.
Internet Explorer Ver. 6.0,Ver. 7.0 or Ver. 8.0* is recommended. Enable the Javascript
functions.
* Ricoh does not guarantee the operation for later versions.
3
In the address bar, enter the IP address “http://xxx.xxx.xxx.
xxx/” recorded in step
1
above.
The Web browser will then display the following page.
Projector name
Projector ID
Menu
Note: If you use a proxy server, do not enable the proxy when accessing the above IP
address.
When the wireless LAN is set to use Ad hoc mode, use the
WEB browser
function in the Wireless LAN Settings Utility dialog box of Network Utility.
Note
This function can be enabled using the WEB Browser function in the Wireless LAN
Settings Utility dialog box of Network Utility without specifying the URL into the
browser’s address bar.
•