Filter
Top Products
If Your Machine Does Not Operate As You Want
109
6
An error message remains,
even if misfed paper is re-
moved.
When a misfeed message
appears, it remains until
you open and close the cov-
er as required.
Clear misfed paper, and then open
and close the front cover. See p.119
“xClearing Misfeeds”.
You turned off the main
power switch.
If you turn the machine off before
removing misfed papers, the error
message will reappear after turning
the machine back on. Keep the ma-
chine turned on while open-
ing/closing the corresponding tray
and the front cover
"
Cannot detect
original size.
" ap-
pears.
When the the exposure
glass cover / ADF is open,
the machine switches to
Low-Power Mode or Sleep
Mode.
Keep the machine turned on while
opening/closing the exposure glass
cover / ADF.
Cannot print in duplex
mode.
You cannot use paper in
the bypass tray for duplex
printing.
For duplex printing, select Tray 1-4
in copier mode or with the printer
driver.
[1 Sided Copy] is selected for
Paper Type: Tray 1-4.
Select [2 Sided Copy] for Paper Type:
Tray 1-4. See p.57 “Paper Type: Tray
1–4”
You forgot your user code. — Contact your service representative.
The user code entry dis-
play appears.
Users are restricted by user
codes.
Enter the user code (up to 8-digits),
and then press [#].
The Authentication screen
appears.
Basic Authentication, Win-
dows Authentication, or
LDAP Authentication is
set.
Enter your login user name and user
password. See p.23 “When the Au-
thentication Screen is displayed”.
“
You do not have
the privileges to
use this func-
tion.
” is displayed.
The use of the function is
restricted to authenticated
users only.
Contact the administrator.
“
You do not have
the privileges to
use this func-
tion.
” continues to be
displayed even though you
have entered a valid user
code.
This user code is not al-
lowed to use the function
selected.
Press the {
{{
{Energy Saver}
}}
} key. Con-
firm that the display goes off, and
then press the {
{{
{Energy Saver}
}}
} key
again. The display will return to the
user code entry display.
Authentication has failed. The entered login user
name or login password is
not correct.
Inquire the user administrator for
the correct login user name and
login password.
The machine cannot per-
form authentication.
Contact the administrator.
Problem Causes Solutions
ThemisC1_AE_zentai_pre_FM.book Page 109 Thursday, July 28, 2005 2:13 PM